Welcome to Zhongshan Yuhong Lighting Technology Co., Ltd.!

Chinese  /  English  /  Russian

18375806156

Copyright(C)Zhongshan Yuhong Lighting Technology Co., Ltd. All rights reserved 粤ICP备11042709号 Powered by www.300.cn中山

Follow us

Contant us

Tel: 18375806156 (Sunny Zhou)
Address: F4, 14 East Henghenan Road, Tiebian Village, Henglan Town, Zhongshan City

National toll free number

Search

YH-XQD001

  • 01: specifications:L1000*W39*H28MM/L1000*W75*H35MM((The length can be set according to the actual situation)
  • 02: Light source :Crystal / Puri / CREE / Osram / Philips, etc.
  • 03: Number of LEDs :18/24/36/48
  • 04: LED color :RGB,RGBW,R G B W Y
  • 05: Mirror surface :Clear tempered glass
  • 06: Lamp body :Stretching 6063 aviation aluminum
  • 07: With lens angle :15°/20°/30°/45°/60°/20º*60º
  • 08: Applicable life:≥50000 hours
Product description

Product specification

specifications

L1000*W39*H28MM/L1000*W75*H35MM(The length can be set according to the actual situation.

Light source

Crystal / Puri / CREE / Osram / Philips, etc.

Number of LEDs 

18/24/36/48

LED color 

RGB,RGBW,R G B W Y

Mirror surface 

Clear tempered glass 

Lamp body 

Stretching 6063 aviation aluminum 

With lens angle 

15°/20°/30°/45°/60°/20º*60º

Applicable life

≥50000 hours

 

Control specification 

Control connector

Outdoor type super 5 cable special waterproof connector 

Color effect

Chase, running water, 256 grayscale, full color, monochrome 

Controller

DMX512 international universal protocol controller

 

Power supply specification 

Input

300mA

Power consumption

18W/24W/36W/48W

Supporting power supply

AC100-260V/DC24V

Power decoding driver

PX3635

 

Environmental specifications

proper temperature

-20º~60º

proper temperature

0%~90%

IP rating

IP68

Electrical grade

DC24V Class III AC220V Class I

Outgoing line

DC24V 2*1.0mm²/AC220V 3*1.0mm² Cable

 

►Precautions before installation

Unpack and carefully inspect the product, please take it lightly;

If any damage is found in the product, please keep the product packaging and report it to the customer in time;

Please do not try to use a damaged product;

The installation of the product must be a licensed professional electrician;

Non-professionals are advised not to dismantle or repair, and our company has the right to refuse to replace or repair the products that have been dismantled or repaired.

 

►Installation steps

Please disconnect the power before installation, and it is strictly forbidden to operate during the installation process;

Open two holes of the same size as the screw holes on the physical product bracket at the place where they need to be installed, and install the screws;

Adjust the angle of the lamp body according to the angle of the light that needs to illuminate the object, and fix the lamp body;

Wiring, connect the brown wire left on the side of the lamp to the positive pole of the power supply, and the blue wire to the negative pole of the power supply.

After confirming that the connection is correct, the power supply is turned on to work normally.

 

►Tips

In order to ensure the normal operation of the product, please use the voltage within the lamp's label voltage range;

Please follow the correct installation steps to install the product;

When installing or removing the product, please disconnect the power of the lamp to avoid the risk of leakage.

 

►Troubleshooting

If it is not the cause of the operation, please confirm whether the following reasons are caused. If the method is followed, the problem cannot be solved. Please stop using and contact a qualified electrician or contact the manufacturer directly.

A: Does the luminaire not illuminate after the power is turned on?

Disconnect the power supply. Check if the power cord of the lamp is well wired to the power supply (or mains) and the power supply is good.

B: Good wiring is still not working?

Have a qualified electrician check if the power supply voltage of the luminaire is lower than the rated voltage of the luminaire itself.

 

►Maintenance precautions

Be sure to turn off the power before cleaning the lamp;

Please do not use cosmetic items or corrosive things for cleaning.

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article